- High performance range suitable for 5th axis machining on horizontal machining centres
- High rigidity for heavy cutting
- High accuracy
- Top mounted motor position allows optimal machining area for horizontal 5 axis machining.
- Air-hydraulic booster provides high clamping torque
- Air-hydraulic booster or direct hydraulic clamping options available
- Rotary joint options available
- Rotary scale can be fitted to further increase accuracy.
*CE correspondence
Model | TUX200 | TUX250 | TUX320 |
---|---|---|---|
Table Diameter (mm) | ø200 | ø250 | ø320 |
Centre Hole Diameter (mm) | ø75H7 | ø105H7 | ø130H7 |
Through Hole Diameter (mm) | ø52 | ø78 | ø110 |
Centre Height (mm) | 140 | 180 | 225 |
Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic |
Clamping Torque (N・m) (at pneumatic 0.45MPa /hydraulic 3.5MPa) | 600 | 1100 | 2600 |
Motor Axis Reduced Inertia (kg・m2) | 0.00055 | 0.00068 | 0.001 |
Servomotor (for Fanuc spec.) | αiF 4/5000-B | αiF 4/5000-B | αiF 8/3000-B |
Total Reduction Ratio | 1/90 | 1/90 | 1/120 |
Max. Rotation Speed (min-1) | 33.3 (at motor 3000min-1) | 33.3 (at motor 3000min-1) | 25 (at motor 3000min-1) |
Allowable Work Inertia (kg・m2) | 0.50 (1.00) note) | 0.98 (1.96) note) | 2.24 (4.48) note) |
Indexing Accuracy (sec) | 20 | 20 | 20 |
Repeatability (sec) | 4 | 4 | 4 |
Mass of Product (kg) | 80 | 142 | 200 |
Allowable Load | 100 (200) note) | 125 (250) note) | 180 (360) note) |
Manual Tailstock (as an option) | TS200RN | TS250RN | TS320RN |
Tail Spindle (as an option) | MSR142A/TSR142A | MSR181A/TSR181A | TSR181A45 |
Rotary Joint (as an option) | RJ40H20V02 Hydraulic/Pneumatic 4 ports | RJ70H25V01 Hydraulic/Pneumatic 6 ports | RJ70H32V01 Hydraulic/Pneumatic 6 ports |