- 90° indexing time: 0.31 sec (Pneumatic clamping not used and servo-on-holding used)
- Quick indexing
- Non backlash
- Less maintenance
- Left hand only
*CE correspondence
Model | RK201 |
---|---|
Right-handed Type | ○ |
Left-handed Type | ○ |
Table Diameter (mm) | ø134 |
Centre Hole Diameter (mm) | ø80 |
Through Hole Diameter (mm) | ø70 |
Centre Height (mm) | 150 |
Clamping Method | Pneumatic |
Clamping Torque (N・m) (at 0.5MPa) | 340 |
Max. Instantaneous Holding Torque (N・m) | Note 1) (240) |
Max. continuous holding torque (N.m) | Note 1) (108) |
Motor Axis Reduced Inertia (kg・m2) | 0.000507 |
Servomotor (for Fanuc spec.) | Note 5) αiS8/4000 |
Total Reduction Ratio | 1/20 |
Max. Rotation Speed (min-1) | 100 |
M signal spec. | 100 |
Allowable Work Inertia (kg・m2) | 0.6 |
Indexing Accuracy (sec) | 20 |
Repeatability (sec) | 4 |
Mass of Product (kg) | 68 |
Allowable Load | 120 |
Vertical (kg) | 60 |
Manual tail stock (Option) | TS160RN** |
Tail spindle (Option) | TSRC/MSRC160 |
Rotary Joint (Option) | RJ70Y20Z03 Hydraulic/Pneumatic 8 ports |