- Roller gear and cam structure
- Optimum solution for compact machining centre
- Built-in rotary joint (5 hydraulic ports and one pneumatic port) available as option
- Low maintenance achieved
*CE correspondence
*Since 2 additional axis controlled NC rotary tables fall under the list controlled items of Export Trade Control Ordinance of Japan, Permission for Export by the Ministry of Economy, Trade and Industry is required before exporting from Japan.
Model | RKT180 |
---|---|
Tilting Angle Range | -35°~+110° |
Table Diameter (mm) | φ95 |
Centre Hole Diameter (mm) | φ50H7 |
Through Hole Diameter (mm) | φ50 |
Centre Height (mm) | 170 |
Clamping Method | Pneumatic |
Clamping Torque (N・m) (at 0.5 MPa) | 350 |
Tilting axis | 550 |
Motor Axis Reduced Inertia (kg・m2) | 0.000239 |
Tilting axis | 0.000425 |
Servomotor (for Fanuc spec.) | αiF2/5000 |
Total Reduction Ratio | 1/72 |
Tilting axis | 1/120 |
Max. Rotation Speed (min-1) | 41.6 (at motor 3000-1) |
Tilting axis | 25 (at motor 3000-1) |
Allowable Work Inertia (kg・m2) | 0.25 |
Indexing Accuracy (sec) | 20 |
Tilting axis | 20 |
Repeatability (sec) | 8 |
Tilting axis | 4 |
Mass of Product (kg) | 193 |
Allowable Load | 60 |
at tilted (kg) | 40 |
Built-in Rotary Joint (as an option) | RJ50RKT180 Hydraulic/Pneumatic 5 ports +Pneumatic exclusive 1 port |