Suitable for milling 5-sided parts.
Magnetic clamping force: 1000kg/100cm2/4 square magnetic poles.
- Electromagnetic table VPE- has a very large magnetic force: 1000 Kgs/100 cm².
- Clamp the details absolutely firmly.
- For maximum cutting.
- Suitable for use on milling machines, can be processed on all 5 parts.
- Includes magnetic desk controller (C1, C2, C3).
- Using power supply: 380V/3PH.
- Do not connect to the controller when the magnet is turned on, so it is very safe (video using the VPE-electromagnetic table).
- Easy and convenient to clamp the workpiece, short clamping time.
- Best suited for heavy duty machining on medium, large and flat rough parts.
- Can be used for a long time and never generates heat that affects the accuracy of the part.
- The device is cool (not hot), so the parts of the magnetic table will not wear out or deform.
- The ON/OFF switch is a single electrical switch. Change the suction power from 20% to 100% with the +/- button on the control box.
- Safe in case of power failure or power failure.
- The minimum thickness of the workpiece is 10mm.
- Each clamping workpiece must use at least 4 magnetic pole blocks.
- Each workpiece needs 3 soft pins VTJ- magnetic transmission.
- VSB elastic block- has 2.5mm up & down elastic.
Product code | Size | Weight (kg) | Code |
---|---|---|---|
VPE-2540 | 240×430 | 50 | 2033-030 |
VPE-2560 | 240×590 | 69 | 2033-031 |
VPE-2580 | 240×800 | 92 | 2033-032 |
VPE-25100 | 240×990 | 111 | 2033-033 |
VPE-3030 | 300×310 | 44 | 2033-048 |
VPE-3040 | 300×430 | 61 | 2033-049 |
VPE-3060 | 300×590 | 82 | 2033-050 |
VPE-3080 | 300×810 | 116 | 2033-051 |
VPE-3090 | 300X870 | 123 | 2033-051A |
VPE-30100 | 300×990 | 138 | 2033-052 |
VPE-4040 | 420×430 | 84 | 2033-052A |
VPE-4060 | 420X590 | 116 | 2033-053 |
VPE-4080 | 420×810 | 159 | 2033-054 |
VPE-40100 | 420×990 | 193 | 2033-055 |
VPE-5060 | 480×590 | 129 | 2033-060 |
VPE-5080 | 480×800 | 185 | 2033-061 |
VPE-50100 | 480X990 | 219 | 2033-062 |
VPE-60100 | 600×990 | 274 | 2033-063A |