CatalogPlace the die in position on the free bearing.
Clamp the upper die to the slide, then clamp the lower die to lower the free bearing by clamping force so that it touches the bottom die with the stopper (Or move the slide down to touch the lower die with the pin , to clamp a die) bottom).
If there are any holes or irregularities in the base plane of the mold, attach a steel plate larger than 3.2T on the base plane.
In addition, adding a free bearing on the plate to move the die can reduce manpower.
| FB-C-4HS | FB-C-8HS | |
| Lifting force in clamp | 40kg | 80kg |
| Maximum lifting force when clamping | 90kg | 180kg |
| Self-respect | Approx. 360g | Approx. 370g |
| Lifting system | Spring System | |
* Groove size: mm
| Category Item | ØA | B | C | D | ØE | F |
| C-4HS | 44 | 40 | 5 | 45 | Ø44 (+0.5; -0) | 43 (+0,2; -0) |
| C-8HS | 44 | 40 | 5 | 45 | Ø44 (+0.5; -0) | 43 (+0,2; -0) |
* Transfer load: (kg)
| Category Item | 0,5 | 1 | 1,5 | 2 |
| C-4HS | 60 | 70 | 80 | 90 |
| C-8HS | 120 | 140 | 160 | 180 |
0968.40.31.38
Chat Zalo
Chat Facebook