Featured
• Usually used in presses mainly when the sliding area and mold are small.
• Use T-groove for easy mold change.
• The mold must have a U-groove.
• Use the horseshoe block to adjust the clamping height of the non-standard mold.
• Customizable for specific mold and press conditions.
Typing Item | SY-2 | SY-4 | SY-6 | SY-10 | SY-16 |
Internal pressure (kgf/aif) | 275 | ||||
Maximum operating pressure (kgf/cnf) | 185 | ||||
Commercial clamping force (ton) | 2 | 42 | 6 | 10,5 | 16.8 |
Travel (mm) | 5 | 5 | 7 | number 8 | number 8 |
Required flow rate (mfi) | 5,6 | 11,7 | 24,2 | 46,7 | 74,8 |
Required flow rate (mfi) | -5 ~ 60t | ||||
Oil | General purpose hydraulic oil (ISO VG 32-46) | ||||
Weight / kg | 1,2 | 2,2 | 3.5 | 6,3 | 12,2 |
Weight H = 100mm
Type | 1 | b | d | F | G | J | Flow | ||
Product | UNCLAMP | CLIP | |||||||
SY-2 | 2 | 3.5 | 18 | 58 | 49 | 12 | 38 | 5,6 | 4.3 |
SY-4 | 2 | 3.5 | 25 | 73 | 59 | 13 | 59 | 11,7 | 7,5 |
SY-6 | 3 | 4,5 | 30 | 88 | 67 | 15 | 64 | 24,2 | 15,6 |
SY-10 | 3 | 5.5 | 40 | 108 | 77 | 15 | 79 | 46,7 | 29,2 |
SY-16 | 3.5 | 5 | 50 | 146 | 87 | 15 | 89 | 74,8 | 46,7 |