Giỏ hàng

Mico KV series Quick mold clamp system for IMM

Vendor: MICO Eng
|

KV is a line of hydraulic mold clamps of Mico (Korea) specialized for plastic molding machines with a capacity of 100-3500 tons.

Số lượng

KV has a superior design with two oil lines (controlling the clamping opening and closing mode independently of each clamp), along with a checkvalve (safety valve) at each clamp; help ensure absolute safety for the mold clamping system. When the system has been activated in clamp mode, if there is a problem such as power failure, or oil leak; pipeline breaks… then the clamps are still guaranteed to continue clamping with standard clamping force for a minimum of 24 hours…)

KV is suitable for use with plastic machines with T-SLOT slotted pliers, the clamping head has the ability to move flexibly to suit a variety of sizes and thicknesses of the mold base plate.

3 main components of KV Hydraulic Mold Clamping System:

(1) mold clamps.

(2) hydraulic power unit /power lock unit.

(3) controller.

ModelKV2KV4KV6KV10KV16KV25
Internal pressure(kgf/cm2)275
Maximum operating pressure (kgf/cm2)185
Clamping force (ton)246101625
Clamping Range (mm)5578810
Required Flow (ml)6.812.525.85980.5112.5
Operating Temperature (°C)-5~60 °C
Weight (kg)3.34.89.815.125.438

 

*Select the Mico clamping system according to the capacity of the injection molding machine:

Plastic injection machine  (ton)100150
~200 
220
~380
450
~550
650
~850
1000
~1300
1600
~2200
2400
~3200
3000
~3500
Clamp modelKV2KV4KV6KV10KV16KV16KV25KV16KV25KV25KV35
Amount8 pieces8 pieces8 pieces8 pieces8 pieces12 pieces8 pieces16 pieces12 pieces16 pieces16 pieces

The KVS and SKV series are two KV mold clamps with a higher degree of automation:

Clamp head designFeatureKVKVSSKV
2 oil lines in/outIndependent clamp opening/closingyesyesyes
Safety valveensure clamping pressureyesyesyes
Proximity sensorautomatic clamping on mold contactNoyesyes
Xylanhdisplacement automatic clamp into positionNoNoyes
Tài khoản Giỏ hàng Trang chủ Facebook Youtube TOP