Magnetic lifting device Assfalg

The TBK4 and TBK6 horizontal electric permanent load-lifting magnets with automatic telescopic arms allow lifting and transporting panels of different sizes from 3m to 16m.
Patented solid steel modules are more heat resistant than equivalent modules made of plastic molded blocks.

Only 400V rated current must be supplied to use these devices and then they will be immediately ready for use.

Through short electrical pulses within seconds, the magnets passing through ASSFALG are turned on automatically or manually at the push of a button. There is no current during the transport of the load and however, the workpiece is clamped as tightly as with a permanent load lifting magnet.
With the head (pitch) function, it is even possible to separate stacked sheets starting with a thickness of 5 mm.

Unnecessary magnet modules can be turned off using multi-channel control. This means that a large through-magnet system can be safely used to transport smaller plates.

No battery backup is required for these magnet modules thanks to EPM technology. Furthermore, the EPMagnet Module does not require any maintenance at all. Low power magnets can be controlled via pulse current switch and preselectable power levels. Efficiency and efficiency can be seen on the one hand, reducing operating costs, and saving time on the other.

The horizontal ASSFALG magnet is particularly user-friendly through its receiving mechanism, which works almost like a remote control. The magnet crossbar is automatically turned on with full clearance of the crane chain, while the magnet sensor near the magnet jack acts as a proximity switch and activates the switch pulse (ON/receiving mechanism). TURN OFF). This also reduces work steps and thus costs as well.