The Cognex In-Sight 5600/5610 series is the base product of Cognex's 5600 Series, using a black and white sensor and 640 x 480 resolution suitable for basic analytical testing applications with a low investment cost. thrifty.
The Cognex In-Sight 5600/5610 series is the base product of Cognex's 5600 Series, using a black and white sensor and 640 x 480 resolution suitable for basic analytical testing applications with a low investment cost. thrifty.
Version 5610 still has the same structural features and physical parameters as the 5600, but shortens the feature to only check the product's ID (reading 1D, 2D codes, reading text characters, Recognize characters by method) Optical Character Recognition (OCR) and Optical Character Verification (OCV).
Customers can refer to the In-Sight 5603/5613 series for higher image resolution, or choose the In-Sight 5605/5615 model if the application requires extremely high definition images. Or you can refer to the In-Sight 5604/5614 series, which is a line of barcode scanners that will give images up to 8 megapixels and the ability to install in locations where the device has only a very small area to contact the product. Products.
High shooting speed
The In-Sight 5600/5610 has the fastest shutter speed of 32 microseconds and the capture speed of up to 60 maximum resolution images in 1 second, which is extremely effective for high-speed transfers.
Easy to deploy and install
With setup software In-Sight EasyBuilder® even the inexperienced user can operate even the most difficult visual inspection tools.
Models of In-Sight 5600/5610
IS5600-00 | INS 5600 VISION SYS W/O PATMAX |
IS5600-01 | IN-SIGHT 5600(128MB)W/O PATMAX |
IS5600-011 | IS5600 DOT CODE |
IS5600-10 | IN 5600 VISION SYS WITH PATMAX |
IS5600-11 | INSIGHT 5600(128MB)WITH PATMAX |
IS5600-111 | IS5600 PATMAX DOT CODE |
IS5610-00 | INSIGHT 5610 DEP ID READER | ||||
IS5610-01 | INSIGHT 5610 DEP ID READER | ||||
IS5610-011 | IS5610-011 DOT CODE ENABLED |
Size | 134.4mm (5.29in) x 124.1mm (4.88in) x 61.4mm (2.42in) with lens guard installed 53.2mm (2.09in) x 124.1mm (4.88in) x 61.4mm (2.42in) without lens protector | |
Weight | 538g with built-in lens protector | |
Shooting speed | 16 fps | |
Color depth | 256 gray levels (8 bits/pixel) | |
Line scan speed | 44,000 lines/second | |
Enable capture | 1 input trigger image capture by opto-isolator. Remote control via Ethernet and RS-232C protocols. | |
Input | Not built-in. Other inputs depend on the compatible I/O module. There is no limit to the number of inputs when using an Ethernet protocol I/O system. | |
Output | 2 built-in high-speed outputs. Other outputs depend on the compatible I/O module. There is no limit to the number of outputs when using an Ethernet protocol I/O system. | |
Rotary encoder | 2 built-in inputs, compatible with 24V DC . voltage signals | |
Ethernet protocol | EtherNet/IP; PROFINET; Modbus/TCP; Melsec; TCP/IP; SMTP; FTP | |
Image processing memory | 256MB SDRAM | |
Water and dust resistant standard | IP 67 with lens guard installed | |
Program memory | 128MB of non-volatile memory; Unlimited storage when connected to a network hard drive | |
Lens type | ||
Material | Die-cast aluminum case | |
Sensor type | 1-inch CCD | |
Sensor parameters | 14.3 mm x 14µm available sensor area, 14µm x 14µm square pixels | |
Resolution | 1024 x 1 (CCD); 1024 x 8192 (up to 8192 scan lines) | |
Required OS version | In-Sight Explorer 4.4.3 | |
Network connections | 1 Ethernet port, 10/100/1000 BaseT with MDIX. IEEE 802.3 auto, TCP/IP protocol | |
Electric used | 24VDC ±10%, 600mA max | |
Serial connection | RS-232C | |
Status light | Report source, network status, network throughput, 2 user status, Network Status, Network Traffic, 2 user configurable |