- Use in temperature ranges from -25...200 °C
- Integrated clamp diaphragm seal with stainless steel membrane
- All wetted parts made of stainless steel
- Reduced wiring complexity when operated as two-wire current loop
- Factory calibration certificate enclosed
The PI22/PI23 series pressure sensors are designed for high-temperature applications in the food and beverage industry such as UHT (ultra high temperature) plants.
A 4-digit LED display, which is visible from all sides even at greater distances, facilitates set-up, maintenance and operation.
The sensors can not only be connected as 3- or 4-wire units but also as loop-powered 2-wire units. This reduces the wiring complexity in new installations and facilitates exchange in existing 2-wire connections.
Parameter setting is effected via the buttons on the sensor or via IO-Link, e.g. using a USB interface. The LINERECORDER SENSOR software is used to visualise, transfer and archive parameter sets.
Product | Measuring range | Process connection |
| Electrical design | Medium temperature | |
PI2307 | -50…1000 mbar | Clamp DN 51 / 2″ | switching signal; analogue signal; IO-Link; (configurable) | PNP/NPN | -25…200 °C | |
-0.73…14.5 psi | ||||||
PI2207 | -50…1000 mbar | Clamp DN 38 / 1,5″ | switching signal; analogue signal; IO-Link; (configurable) | PNP/NPN | -25…200 °C | |
-0.73…14.5 psi | ||||||
PI2306 | -0.124…2.5 bar | Clamp DN 51 / 2″ | switching signal; analogue signal; IO-Link; (configurable) | PNP/NPN | -25…200 °C | |
-1.8…36.27 psi | ||||||
PI2206 | -0.124…2.5 bar | Clamp DN / 1,5″ | switching signal; analogue signal; IO-Link; (configurable) | PNP/NPN | -25…200 °C |